XQ-2B Metallographic Sample Mounting Press
* This machine is designed for the purpose of mounting process of those small, difficult-to-hold or irregular specimens before grinding and polishing. After mounting process, it can facilitate the grinding and polishing of specimen, and also easy to observe material structure under metallographic microscope, or measure the hardness of the material by hardness tester.
*Handwheel simple and elegant, Easy Operation, simple and intuitive interface, easy operation, stable and reliable working performance.
* Manual working, one time can inlay just one sample.
1）The height is no more than 1000m;
2）The temperature of surrounding medium can not be lower than -10 °C or over 40 °C;
3）The relative humidity of air should be no more than 85% (20 °C).
4）The voltage fluctuation should be no more than 15% and there should be no obvious vibration source around.
5）There should be no current conducting dust, explosive and corrosive air.
| Punch diameter of specimen | φ22mm or φ30mm or φ45 mm (choose one kind of diameter when purchasing) |
| Temperature controlling range | 0-300 ℃ |
| Timing range | 0-30 minutes |
| Consumption | ≤ 800W |
| Power supply | 220V, single phase, 50Hz |
| Overall dimensions | 330×260×420 mm |
| Weight | 33 kg |
