ZXQ-5A Automatic Metallographic Mounting Press (water cooling system)

Short Description:

After setting up the parameters like heating temperature, holding time, pressure etc., just put the sample and mounting materials inside, cover it with lid, and press the start button, then the mounting work can be done automatically.


Product Detail

Product Tags

Features and Application

* This machine is a kind of automatic type metallographic specimen mounting press which has the function of water in/out cooling.
* It features simple and intuitive interface, easy operation, stable and reliable working performance.
* This machine is applicable for thermal inlaying of all materials (thermosetting and thermoplastic).
* After setting up the parameters like heating temperature, holding time, pressure etc., just put the sample and mounting materials inside, cover it with lid, and press the start button, then the mounting work can be done automatically.
* When working, it is not necessary for operator to be on duty beside the machine.
* Four kinds of moulds can be selected according to the different requirements of the specimen, and you can also simultaneously make two specimens with equal diameter, the preparation capacity has been doubled.

Technical Parameter

Mould specification  Φ25mm, Φ30mm, Φ40mm, Φ50mm
Power  220V, 50HZ
Maximum consumption  1600W
System pressure setting range  1.5~2.5MPa
(Corresponding sample preparing pressure  0-72 MPa
Temperature setting range  Room temperature ~180℃
Temperature holding time setting range  0~99minutes and 99seconds
Outline dimensions  615×400×500mm
Weight  110KG
Cooling method  water cooling

Reference Table for the sample preparation

Thermosetting materials Diameter of specimen Volume of inserted powder Heating temperature Temperature holding time Time for cooling Pressure
Urea formal degde  moulding powder

(white)

φ25 10ml 150℃ 10min 15min 300-1000kpa
  φ30 20ml 150℃ 10min 15min 350-1200kpa
  φ40 30ml 150℃ 10min 15min 400-1500kpa
  φ50 40ml 150℃ 10min 15min 500-2000kpa
Insulating

moulding powder (black)

φ25 10ml 135-150℃ 8min 15min 300-1000kpa
  φ30 20ml 135-150℃ 8min 15min 350-1200kpa
  φ40 30ml 135-150℃ 8min 15min 400-1500kpa
  φ50 40ml 135-150℃ 8min 15min 500-2000kpa

Detailed Pictures


  • Previous:
  • Next: